English
Exterior wall lights are exposed to wind, sun, rain, and dust for a long time, and dirt will accumulate on the surface and inside of the lamp. Regular and professional cleaning of exterior wall lights is not just a simple cleaning, but a key maintenance measure to ensure the long-term stable operation of the lighting system.
Content
1. Ensure lighting effect
The primary task of a lamp is to provide light. Dirt will directly destroy the light effect and greatly reduce its design value.
Improve light extraction efficiency and ensure design effect
Problem: Dust, oil, insect corpses, etc. adhere to the lampshade shell, forming a "shielding film" that absorbs and scatters light.
Consequences: The brightness of the lamp will decrease significantly (up to 30%-50% or more) and the illumination will be insufficient. The originally designed beam angle, spot shape and uniformity were destroyed, making it impossible to achieve the night scene effect expected by architects and lighting designers.
Restore true light color and avoid color distortion
Problem: Especially with RGB full-color fixtures or lights with a specific color temperature, thick dirt can change the color of the light like a filter.
Consequences: It causes color temperature drift and color saturation decrease, making the light color on the building facade dim and distorted, seriously affecting the visual beauty and brand image.
2. Prevent safety hazards
Safety always comes first. Dirty light fixtures hide a variety of risks.
Reduce the risk of overheating and prevent fire hazards
Problem: Although LED lamps are cold light sources, their driving power supplies and chips still generate heat. Thick dirt (especially fluffy floc) will wrap around the lamp and seriously affect heat dissipation.
Consequences: It causes the internal components of the lamp to overheat for a long time, accelerates aging, and shortens the service life. In extreme cases, it may cause circuit short circuit, component burnout, or even fire.
Check for structural hazards and avoid fall risks
Problem: Exterior wall lamps are subject to vibration and temperature changes all year round, and the fixing screws and brackets may become loose and corroded.
Aftermath: The cleaning process is an opportunity for a closer inspection. Loose screws can be found and tightened in time, and rusted brackets can be replaced, effectively preventing major safety accidents caused by falling objects from heights.
3. Extend the life of lamps
Protect lamp housing and sealing
Problem: Chemical pollutants in the air (such as acid rain, salt spray) will corrode the metal shell and plastic lampshade of lamps, making their surfaces rough, aging and brittle.
Consequences: Regular cleaning can remove these corrosive substances and slow down the aging process. At the same time, during cleaning, you can check whether the sealing rubber ring is aging or cracked, and replace it in time to prevent the intrusion of rain and moisture and protect the internal core components.
Reduce the frequency of maintenance and replacement
Problem: Lamp damage caused by poor heat dissipation, water ingress, etc. is a common fault.
Consequences: Through cleaning and preventive maintenance, the incidence of such failures can be significantly reduced, thereby reducing expensive repair costs and crane/aerial platform rental fees, resulting in lower overall costs in the long run.
4. How to clean exterior wall lights correctly?
Safety first:
Power outage! All relevant light fixtures must be switched off before cleaning.
The operation must be carried out by professional aerial workers using hanging baskets, spider carts or properly fastened safety belts, and risks are strictly prohibited.
Use appropriate tools and cleaners:
Use neutral detergent and a soft cloth or sponge to wipe. It is strictly prohibited to use strong acids, strong alkali or organic solvents (such as banana water, gasoline), which will seriously corrode and damage the surface of the lamp.
For stubborn stains, wipe with neutral soap diluted in water, and finally rinse with water (make sure the lamp is waterproof).
Key inspection and maintenance:
While cleaning, you should check:
Sealing: Whether the rubber ring has good elasticity and whether the interface is tight.
Fixings: Whether the screws and brackets are firm and whether there is any rust.
